I was telling my brother of the different ways I sharpen and he seemed interested in the slab/sandpaper method. When I went to get the extra supplies I picked up a slab of granite, adhesive, and sandpaper for sharpening. When the job was completed, the saw, the can of finish, and the slab with sandpaper were gifted to my brother. I could have shortened my list a little,
In the sixty years of woodworking I have found two tools of increasing necessity. One is a band saw. I can do most of my work with a band saw and hand plane. The second tool is a bow saw, or actually several bow saws. They will replace the band saw if required, though they are slow. One I made about twenty years ago has a one and a half inch wide rip blade and is about thirty inches long. I think the blade is from an old industrial band saw blade I picked up and sharpened into a rip saw blade. It works very well on ripping lumber, logs, etc. Though it tires me out to much to use it now.
The Makita 1/4 in. Laminate Trimmer combines power The Makita 1/4 in. Laminate Trimmer combines power and speed with precise control for smooth trimming and routing applications. It is engineered for woodworkers finish carpenters and general contractors seeking a best-in-class laminate trimmer. The Laminate Trimmer features a 4 Amp motor with 30 000 RPM ideal for smooth trimming ...  More + Product Details Close

A Jack Handplane is a middle size “bench plane” (i.e. planes that are used so often that they are usually on your workbench). If you’re on a budget a jack plane can temporarily be used in place of other planes that perform specialized functions: (1) rough stock removal (if you buy a second iron/blade and shape it with a curved “camber”), (2) jointing board edges (as long as the board isn’t over 3x the length of your jack plane), and (3) smoothing the boards.
Thank you for this post. I am about three years into wood working with handtools. I didn’t want to be a handtool collector. I wanted a good set of tools I could use. Since funds were tight and I wasn’t sure if I would keep doing this, I wanted to build my tools slowly. What you outlined is more or less what I ended up getting and it has indeed served me well. One can easily do a lot with all of these tools. At some point about two years into the hobby, I had a much better feel for what I wanted to make and what I may or may not need beyond this.
The Makita 1/4 in. Laminate Trimmer combines power The Makita 1/4 in. Laminate Trimmer combines power and speed with precise control for smooth trimming and routing applications. It is engineered for woodworkers finish carpenters and general contractors seeking a best-in-class laminate trimmer. The Laminate Trimmer features a 4 Amp motor with 30 000 RPM ideal for smooth trimming ...  More + Product Details Close
After you have chosen the perfect table saw for your woodshop, the next major purchase one should consider would be a compound miter saw. While not as expensive as a quality table saw, a compound miter saw is invaluable for cutting compound angles (beveled, mitered and combination cuts) on the ends of a piece of stock. Once you develop your ability to make precise cuts with a compound miter saw, you'll find that your circular saw spends a little more time in the drawer than it used to.
Rabbets are one of the most common joints in furniture making, so a handplane that cuts a rabbet should be toward the top of your list of tools to buy. Yes, rabbets can be cut without a handplane, but at greater difficulty. I own a lot of handplanes that cut rabbets, including wooden rabbet planes, metal rabbet planes, shoulder planes, and moving fillister planes. While I use all of them for specialty tasks, I find that a metal or wooden moving fillister plane (pictured above) is the most useful, as it allows me to cut rabbets with the grain, across the grain, and allows me to easily cut panels (as seen above). And the movable fence helps greatly with accuracy. I discuss rabbet planes in great detail in the handplane buyer’s guide.
With the right tools and materials, what you build is only limited by your imagination and creativity. So why not have a little fun with the kids and teach them something at the same time? Our woodworker tools and woodworking supplies will help you put together an easy birdhouse, squirrel feeder or butterfly house. The kids will love to use our paint samples to add their creative touch, and will enjoy displaying the finished product in the backyard.
×